Call our Sales Team
01903 538 488
Mon - Fri   9am - 6pm
Welcome | Technical Guide | Seagull Facts | Delivery Options | Terms and Conditions | Returns Policy | VAT | Useful Links | Contact Us
Seagull Products
Click on a category to browse our products
Common Problem Areas
Click on a problem area to see recommended products
delivery optionsDelivery Options
Orders placed before 3pm are normally shipped the same day.
Standard Delivery
3 - 5 Working Days		£4.99
Express Delivery
Next Working Day		£8.99
Premium shipping charges apply for next day delivery to some areas of Scotland, Northern Ireland and Northumberland.
Please call for international delivery rates.

Netting Mounts

Netting Mounts are used to lift or suspend bird netting off the surface that it is protecting sufficiently high enough to prevent the pest birds pushing the netting down onto the surface and then landing on it.

We offer a comprehensive range of netting mounts to suit the area being netted. Some lift the net just enough to provide adequate protection whilst others allow enough lift for maintenance access underneath.

For pigeon control products visit our sister website by clicking here www.pigeonstop.co.uk

1 - 7 of 7
 

Dorner Roof Corner Bracket - Stainless Steel - Each (NF182)

Click here for more information
Category: Netting Mounts
These roof brackets are designed to lift netting off flat roofs, whilst looking acceptable at the same time.

They are 360mm high and are ideal for both Pigeons and Seagulls.

These will pierce the roof and coach bolts are required for fixing.

To avoid leaking roofs after fixing the brackets use a silicone sealant.

Made from stainless steel.
Dorner Roof Corner Bracket - Stainless Steel - Each

£46.04

ex. VAT

Dormer Roof Intermmediate Bracket Stainless Steel - Each (NF183)

Click here for more information
Category: Netting Mounts
These roof brackets are designed to be fitted in conjuction with the corner brackets along the striaght edge of the roof, to keep the bird netting raised off the roof.

They are 360mm high and are ideal for both Pigeons and Seagulls.

These will pierce the roof and coach bolts are required for fixing.

To avoid leaking roofs after fixing the brackets use a silicone sealant.

Made from stainless steel.
Dormer Roof Intermmediate Bracket Stainless Steel - Each

£39.80

ex. VAT

Non Piercing Flat Roof Mount Stainless Steel - Each (NF184)

Click here for more information
Category: Netting Mounts
These box section roof mounts are ideal for netting off flat roofs.

The mounts are non piercing, they are simply placed on the roof, pre-drilled making it easy for the running of wire rope.

Lightweight and made from grade 316 Stainless Steel so they won't rot.

Available in 50cm and 100cm heights.
Non Piercing Flat Roof Mount 500mm Stainless Steel - Each

£41.20

ex. VAT
Non Piercing Flat Roof Mount 1000mm Stainless Steel - Each

£41.20

ex. VAT

Intermediate Non Piercing Roof Mount (NF186)

Click here for more information
Category: Netting Mounts
This non piercing roof mount allows effective installation of bird netting without piercing the roof. The mounts are weighted down by using paving slabs (Not provided)

Ideal in the protection of industrial roofs against pigeons and seagulls.

This mount requires 2 paving slabs, and is available in either 1m or 2m heights.
Intermediate Non Piercing Roof Mount 1m

£85.49

ex. VAT
Intermediate Non Piercing Roof Mount 2m

£99.99

ex. VAT

Corner Non Piercing Roof Mount (NF187)

Click here for more information
Category: Netting Mounts
This corner non piercing roof mount allows effective installation of bird netting without piercing the roof. The mounts are weighted down by using paving slabs (Not provided)

Ideal in the protection of industrial roofs against pigeons and seagulls.

This mount requires 4 paving slabs, and is available in either 1m or 2m heights.
Corner Non Piercing Roof Mount 1m

£99.99

ex. VAT
Corner Non Piercing Roof Mount 2m

£119.80

ex. VAT

Non Piercing Ridge Mount (NF190)

Click here for more information
Category: Netting Mounts
This non piercing ridge mount allows effective installation of bird netting without piercing the roof. The mounts are weighted down by using paving slabs (Not provided)

Ideal in the protection of industrial roofs against pigeons and seagulls.

This mount requires 4 paving slabs, and is available in either 1m or 2m heights.
Non Piercing Ridge Mount 1m

£161.16

ex. VAT
Non Piercing Ridge Mount 2m

£174.16

ex. VAT

Slate Brackets x 10 (NF192)

Click here for more information
Category: Netting Mounts
These are designed to slip between adjoining slates to hold the wire rope close to the surface of the roof, without having to drill the tiles.

Made from Stainless Steel.

The centre of the hole sits 200mm above the base of the bracket.

Sold in packs of 10
Slate Brackets x 10

£13.49

ex. VAT
1 - 7 of 7
shopping cartYour Basket
There are no items in your basket.
online paymentOnline Payment
All major cards accepted online 24/7 through our secure payment system.
All major cards accepted
commercial ordersCommercial Orders
If you would like to pay by BACS, Cheque or International Money Transfer please call us on:
+44 (0)1903 538 488
Orders are shipped on receipt of cleared funds.
Orders can be sent via fax to:
+44 (0)1903 539 331
secure encryptionSecure Encryption
Protected by Thawte securityThis website is protected by Thawte secure encrytion
free adviceFree Advice
If you are unsure of what to buy or how to install a product just call 01903 538 488 and ask.
© Crisp Websites Limited