This kit comes complete with spikes and enough gutter clips for the specified length. Simply snap the clips on to the base of the spike strip and slide into place on the rainwater gutter's outer lip.
These spikes will protect an area between 165mm and 200mm. The actual width of the spikes is 165mm from the outermost tips.
The Seagull Spike Window Kit allows you to attach seagull anti perch spikes to opening casement windows to allow ventilation whilst maintaining protection of the windowledge in front of the casement window.
This kit comes complete with spikes and enough window clips for the specified length (use two clips per 33cm section of spike).
These spikes will protect an area between 165mm and 200mm. The actual width of the spikes is 165mm from the outermost tips.
Everything you need in addition to spikes and adhesive, to install gull or pigeon spikes.
KIT INCLUDES
FRAME GUN for adhesive
RIGGERS GLOVES for protection whilst pressing down spikes
SCRAPER for guano removal
WIRE BRUSH for surface preparation
DISPOSABLE SCRUBBING BRUSH for surface priming.
This kit comes complete with spikes and enough gutter clips for the specified length. Simply snap the clips on to the base of the spike strip and slide into place on the rainwater gutter's outer lip.
These spikes will protect an area between 165mm and 200mm. The actual width of the spikes is 165mm from the outermost tips.
The Seagull Spike Window Kit allows you to attach seagull anti perch spikes to opening casement windows to allow ventilation whilst maintaining protection of the windowledge in front of the casement window.
This kit comes complete with spikes and enough window clips for the specified length (use two clips per 33cm section of spike).
These spikes will protect an area between 165mm and 200mm. The actual width of the spikes is 165mm from the outermost tips.
Use to secure anti perch spikes of all varieties to pipes. Use 2 zip ties per 33cm strip of spikes. One 430mm cable tie will stretch around a pipe up to 125mm in diameter.
Dimensions 150mm high X 165mm wide between outer tips. Protects areas up to 265mm in width. Made in the UK. Use on ledges, parapets, ridge tiles, girders, chimney pots/cowls, gutters, signs, window sills.
For use with a caulking gun this is a professional product that cannot be found in DIY shops and is vastly superior to ordinary clear DIY silicone due to it's very easy application and the fact that it stays permanently elastic after curing.
Use 1 310ml tube of silicone for every 5-meters of spikes
.jpg)
.jpg)
.jpg)
.jpg)
(1).jpg)
